Actions

Difference between revisions of "No. 4 Aircraft Depot RAAF"

From Our Contribution

(Unit Personnel)
(Unit Personnel)
 
(13 intermediate revisions by the same user not shown)
Line 14: Line 14:
  
 
==Brief History==
 
==Brief History==
No. 4 Aircraft Depot was formed at Pearce on 15 May 1942 with a cadre of one officer and five airmen. At the end of the month it moved to its 'permanent' home, the racecourse at Boulder. Over the following months hangars, barrack blocks and other facilities were built and the adjacent airfield was taken over. By the end of 1942 the Depot was ready to start repairing and overhauling aircraft engines, airframes and ancillary aircraft equipment, mainly for units located in Western Australia. At that stage at had a strength of 17 officers and 206 airmen.
+
No. 4 Aircraft Depot was formed at Pearce on 15 May 1942. At the end of the month it moved to its 'permanent' home, the racecourse at Boulder. Over the following months hangars, barrack blocks and other facilities were built and the adjacent civil airfield was taken over. By the end of 1942 the Depot was ready to start its task of repairing and overhauling aircraft engines, airframes and ancillary aircraft equipment, mainly for RAAF units located in Western Australia. The first aircraft to be worked on were six Brewster Buffalo aircraft from No. 25 Squadron at Pearce. By the end of December 1942 the engine repair workshops had been completed and the first batch of Pratt and Whitney engines had arrived for overhaul. These engines, the overhaul of which was to be a major task for the Depot over the next three years, were used in US Navy and Qantas Consolidated PBY Catalinas as well as RAAF Bristol Beaufort, Douglas Dakota C-47 and CAC Boomerang aircraft. The Catalina engines were sent to Boulder by rail, while those from RAAF aircraft normally came with the aircraft.
  
  
The first aircraft to be worked on were Brewster Buffalos from No. 25 Squadron at Pearce. By the end of 1942 the engine repair workshops had been completed and the first batch of Pratt and Whitney R1830, 14 cylinder twin-row radial engines had arrived for overhaul. This was to e a major task for the unit over the next three years.as they were used in US and Qantas Catalinas as well as RAAF Beaufort, Dakota and Boomerangs aircraft. The Catalina engines arrived by rail, and the RAAF engines with the aircraft. By mid 1943 the Depot staff numbered 26 officers, 664 airmen, and 24 WAAAF.
+
By mid-1943 construction of the depot was still not complete, but work on aircraft, engines, and ancillary equipment was proceeding at a rapid rate. By then the Depot strength was 26 officers, 664 airmen and 24 WAAAFs. The main aircraft being overhauled were Beauforts from No. 14 Squadron at Pearce. In late 1943 the facilities were completed, and staffing built up to almost 1,000 personnel, with work overhauling CAC Boomerang aircraft from 85 Squadron at Guildford and Vultee Vengeance aircraft from No. 25 Squadron RAAF at Pearce as well as Bristol Beaufort aircraft from No. 14 Squadron RAAF. Other aircraft also passed through the depot but in smaller numbers.
  
  
 +
The repair sections and shops were: engine, propeller, instrument, bombsight, parachute, hydraulic, armament, radio, radar, sheet metal, machine shop, coppersmith, black-smith, carpentry, fabric, welding. fitting and turning, paint shop, salt bath, electroplating and engine test bed. On the flying side there was a flight test section, air traffic control and tarmac servicing. This latter section was kept busy, not only with aircraft being tested and ferried to and from the Depot, but also aircraft transiting between Perth and eastern Australia. In December 1943 the Depot received a ferry pilot. Until that time this task had been carried out by squadron aircrew. The pilot's job was to test fly aircraft after repair or overhaul to ensure that it was fully serviceable for squadron service. Once three or so flights were completed, the aircraft was returned to its unit, either by the test pilot or squadron aircrew, and another aircraft was collected for ferry to the Depot. In 1944 the test pilot averaged 24 per month and 6 ferry flights per month
  
Facilities were completed late in 1943 and Depot strength increased to almost 1,000. They were now also working on [[CAC Boomerang]] and [[Vultee Vengeance]] as well as [[Bristol Beaufort]], [[CAC Wirraway]], [[North American Dakota]], [[Lockheed Hudson]], and [[Curtis P-40 Kittyhawk]] aircraft. By January the following repair sections and shops were in full production: engine, propeller, instrument, bombsight, parachute, hydraulic, armament, radio, radar, sheet metal, machine shop. copper-smith, black-smith, carpentry, fabric, welding. fitting and turning, paint shop, salt bath, electroplating and engine test bed. On the flying side there was a flight test section, air traffic control and tarmac servicing. This latter section was kept busy, not only with aircraft being tested and ferried to and from the Depot, but also aircraft transiting between Perth and eastern Australia.
 
  
 +
Towards the end of 1944, when No. 85 Squadron at Guildford was re-equipped with Spitfires, its Boomerangs were ferried to the Depot to be held in fully operational condition in the replenishment pool. This meant that they had to be flown once per week which, with some 20 aircraft, meant that the test pilot had to carry out up to five flights per day over the three months that the aircraft were held on strength. In March 1945 the majority were ferried out to No. 83 Squadron in Queensland. Also at the end of 1944, when 25 Squadron at Pearce was re-equipped with Consolidated B-24 Liberators, its Vultee Vengeances were ferried to the Depot for storage and subsequent disposal.
  
  
Throughout 1944 work continued at a steady pace, and the unit enjoyed very high morale. Towards the end of 1944, No. 85 Squadron was re-equipped with Spitfires, and No. 25 Squadron re-equipped with B-24 Liberators. The CAC Boomerang and Vultee Vengeance aircraft replaced were ferried to No. 4 Aircraft Depot to be maintained until disposed of. After mid-1945 the workload of the Depot started to decrease, reflecting reduced operational activity in the Western Area. The US Navy Catalinas had also moved from Perth. After the Japanese surrender in mid-August, work was restricted to the repair and overhaul of currently held equipment. From then until April 1946, when the Depot closed there was a steady run down in personnel.  
+
After mid-1945 the workload of the Depot started to falloff due to a general reduction of operational activity in Western Area and the departure of the Untied States Navy Catalinas from Perth. Following the Japanese surrender in mid-August, work was restricted to the repair and overhaul of currently held equipment. From then until April 1946, when the Depot closed and all facilities were handed over to a care and maintenance unit, there was a steady run down in personnel. In November 1945 the radio, radar, welding, blacksmith, coppersmith, fitting and turning, and electrical sections were closed, followed by the engine repair, airframe repair and general engineering sections 1n January 1946. The care and maintenance unit was closed in April l947.
 +
===Unit Personnel===
 +
* [[Robert Alexander MacLean]] 23 Jan 1943 - 4 Jun 1944
 +
* [[Alwyn Raymond Liddell]] 19 May 1943 - 28 Apr 1944
 +
* [[Nicholas Keating]] 21 Jun - 8 Sep 1944
 +
* [[Alfred Ensor Hand]] 30 Oct 1944 - 3 Jan 1946
 +
* [[Edward Trayton Elvish]] 9 Sep 1943 - 15 Oct 1945
 +
* [[Dulcie May Faulkner]] 6 Jun - 8 Nov 1944
 +
* [[William Ramsay Martin]] 10 Jun 1944 - 30 May 1945
 +
* [[George Laverick Gordin]] 13 Jun 1944 - 24 Jun 1945
 +
* [[Maxwell Kenneth Ottaway]] 30 Jul - 27 Nov 1945
 +
* [[Reginald Thomas Blackman]] 17 Jan - 13 Jun 1945
  
===Unit Personnel===
 
*[[Alfred Ensor Hand]] 30 Oct 1944 - 3 Jan 1946
 
*[[Robert Alexander MacLean]] 23 Jan 1943 - 4 Jun 1944
 
*Edward Trayton Elvish
 
*Dulcie May Faulkner
 
*Beryl Marion Francis
 
*Robert Alexander MacLean
 
*Maxwell Kenneth Ottaway
 
  
==Trainees===
+
====Trainees====
  
 
====Notes====
 
====Notes====
 
+
Content has come from Units of the Royal Australian Air Force - A Concise History - Volume 7 Maintenance Units - Australian Government Publishing Service - 1995
 
<references />
 
<references />
  

Latest revision as of 23:44, 29 May 2024

4 AD.jpg
Aerial view of Boulder base for No. 4 Aircraft Depot


Brief History

No. 4 Aircraft Depot was formed at Pearce on 15 May 1942. At the end of the month it moved to its 'permanent' home, the racecourse at Boulder. Over the following months hangars, barrack blocks and other facilities were built and the adjacent civil airfield was taken over. By the end of 1942 the Depot was ready to start its task of repairing and overhauling aircraft engines, airframes and ancillary aircraft equipment, mainly for RAAF units located in Western Australia. The first aircraft to be worked on were six Brewster Buffalo aircraft from No. 25 Squadron at Pearce. By the end of December 1942 the engine repair workshops had been completed and the first batch of Pratt and Whitney engines had arrived for overhaul. These engines, the overhaul of which was to be a major task for the Depot over the next three years, were used in US Navy and Qantas Consolidated PBY Catalinas as well as RAAF Bristol Beaufort, Douglas Dakota C-47 and CAC Boomerang aircraft. The Catalina engines were sent to Boulder by rail, while those from RAAF aircraft normally came with the aircraft.


By mid-1943 construction of the depot was still not complete, but work on aircraft, engines, and ancillary equipment was proceeding at a rapid rate. By then the Depot strength was 26 officers, 664 airmen and 24 WAAAFs. The main aircraft being overhauled were Beauforts from No. 14 Squadron at Pearce. In late 1943 the facilities were completed, and staffing built up to almost 1,000 personnel, with work overhauling CAC Boomerang aircraft from 85 Squadron at Guildford and Vultee Vengeance aircraft from No. 25 Squadron RAAF at Pearce as well as Bristol Beaufort aircraft from No. 14 Squadron RAAF. Other aircraft also passed through the depot but in smaller numbers.


The repair sections and shops were: engine, propeller, instrument, bombsight, parachute, hydraulic, armament, radio, radar, sheet metal, machine shop, coppersmith, black-smith, carpentry, fabric, welding. fitting and turning, paint shop, salt bath, electroplating and engine test bed. On the flying side there was a flight test section, air traffic control and tarmac servicing. This latter section was kept busy, not only with aircraft being tested and ferried to and from the Depot, but also aircraft transiting between Perth and eastern Australia. In December 1943 the Depot received a ferry pilot. Until that time this task had been carried out by squadron aircrew. The pilot's job was to test fly aircraft after repair or overhaul to ensure that it was fully serviceable for squadron service. Once three or so flights were completed, the aircraft was returned to its unit, either by the test pilot or squadron aircrew, and another aircraft was collected for ferry to the Depot. In 1944 the test pilot averaged 24 per month and 6 ferry flights per month


Towards the end of 1944, when No. 85 Squadron at Guildford was re-equipped with Spitfires, its Boomerangs were ferried to the Depot to be held in fully operational condition in the replenishment pool. This meant that they had to be flown once per week which, with some 20 aircraft, meant that the test pilot had to carry out up to five flights per day over the three months that the aircraft were held on strength. In March 1945 the majority were ferried out to No. 83 Squadron in Queensland. Also at the end of 1944, when 25 Squadron at Pearce was re-equipped with Consolidated B-24 Liberators, its Vultee Vengeances were ferried to the Depot for storage and subsequent disposal.


After mid-1945 the workload of the Depot started to falloff due to a general reduction of operational activity in Western Area and the departure of the Untied States Navy Catalinas from Perth. Following the Japanese surrender in mid-August, work was restricted to the repair and overhaul of currently held equipment. From then until April 1946, when the Depot closed and all facilities were handed over to a care and maintenance unit, there was a steady run down in personnel. In November 1945 the radio, radar, welding, blacksmith, coppersmith, fitting and turning, and electrical sections were closed, followed by the engine repair, airframe repair and general engineering sections 1n January 1946. The care and maintenance unit was closed in April l947.

Unit Personnel


Trainees

Notes

Content has come from Units of the Royal Australian Air Force - A Concise History - Volume 7 Maintenance Units - Australian Government Publishing Service - 1995


External Links